Contact: Mr.Yang
Tel:0753-2730588
Fax:0753-2486800
E-mail:hdbelts@126.com
AUTOMOTIVE TIMING BELT |
It consisted of three parts: rubber layer,tensile member and nylon fabric layer. 1.tensile member is composed of glass fiber where imported from England. It is able to bear large loads and has no elongation. It is use under normal condition ,The service life will be longer. 2.The rubber layer is CR or HNBR. It has the feature of high abrasion resistance,oil and heat resistance.
4.The teeth of timing belt and cross-section of the pulley have been specially designed so that the mesh between belt and pulley can be perfectly guaranteed. Our timing belt are CR and HNBR timing belt. CR timing blet,which provide excellent oil&heat resistance preformance and excellent price-performance ratios,is widely applied to automotive trasmission fields;HNBR timing belt has higher performance than CR.But the price is more expensive,so it is applied to top-grade automotive transmission field. |
If you want to know the details of our product, click "details" |
Specification table of synchronous belt |
TOOTH TYPE | PITCH(mm) | HEIGHT(mm) | DETAILS |
ZA | 9.525 | 1.91 | details |
ZB | 9.525 | 2.30 | |
ZBS | 9.525 | 2.80 | |
RU | 9.525 | 3.44 | |
MR | 9.525 | 3.54 | |
FS | 9.525 | 3.60 | |
YU | 8.000 | 3.00 | |
MY | 8.000 | 3.06 | |
S8M | 8.000 | 3.05 | |
YE | 8.000 | 3.05 | |
YF | 8.000 | 3.05 |
![]() |
1.We can produce belts according to your supplied sample or drawing. 2.We can produce particular type belts as clients'request. |
©2011 梅州市日升橡胶传动带有限公司 版权所有 粤ICP备11100949号-1技术支持:梅州乐创网络